Descripción del producto

The processing line consists of the following modules:

Saw
The CRP Cutter stands for quiet cutting with a very sharp and straight cut as a result.
The combination of a saw blade with supporting blade ensures perfect running and makes it possible to cut at a low speed.
As a result, the saw hardly makes any noise and the saw cabinet remains clean. Woody crops also pass through the CRP Cutter with ease.

Defoliation
The CRP Stripper removes all the leaves from the lower part of each stem, without leaving any leaf residue or damage, even if the leaves are brown and / or limp.
The stem length to be deflated is adjustable to a maximum of 40 cm. The CRP Stripper can be switched off separately.

Dirt disposal
The released green waste is removed centrally by means of a conveyor belt. The dumping height is 1.6 meters.

Forests
The CRP Buncher accurately counts the set number of stems. After the bunch has been carefully assembled, it is entered into the binders.

Binding machines
Two Potveer CRP Binders bind the stems firmly together with elastic. The Potveer CRP Binder binds with a constant and calm stroke and achieves a high capacity of 3,000 forests per hour.
The binder has a simple and modular construction, making it easy to maintain with minimal wear. Elastic can be threaded in a movement so that a roll change can be carried out quickly.
In addition, the binder is provided with wire break protection, whereby the processing line is automatically stopped or a signal is issued by the binder if the elastic is broken or the roll is empty.
lf any elastic residues remain in the binder mechanism at the end of a roll or order, this will be released automatically. The elastic tension can be adjusted for tight or loose bindings.
By manually operating the cycle button, the binder makes a stroke that can be tested.

Collect & collect
The bundles are collected side by side on the collection belt which makes a step at each bundle by means of a photocell at the start of the strip.

Control functions and control panel
The machine is provided with a control panel near the input area. In addition to operating the line, the following data can be entered here:
• Number of stems per bunch
• Number of bunches per order
• Number of bunches for reaching the end of each order with an audible signal

You can also set:
• The speed / capacity of the processing line in 4 positions
• The step size for the collection belt
• The language of the control panel in Dutch, English, Spanish, Polish